The plastic dryer works by using hot air to dry or remove moisture from plastic products or pellets. The dryer consists of a hopper, a heating system, a fan, and a drying chamber.
The working principle of the plastic dryer is: the fan blows through the heater hopper become hot air and blows into the inside of the drying chamber. There are upper and lower screens inside the drying chamber and the surface of the hopper as ventilation into the dryer barrel. The material temperature rises to achieve the purpose of drying the material. After the electricity is turned on, the heating pipe will generate heat, and under the action of the fan, the hot air will be blown into the barrel to achieve the purpose of drying.
First, the plastic pellets or products are placed in the hopper, and then the hot air generated by the heating system is blown into the drying chamber through the fan. In the drying chamber, the plastic products are exposed to the hot air, which evaporates moisture from them, making them dry.
The temperature and flow rate of the hot air can be adjusted to suit different materials and product sizes. Once the drying process is complete, the plastic products are ready to undergo the next step of the manufacturing process.
Overall, the plastic dryer works by using hot air to remove moisture from plastic products, making them dry and ready for further processing.
The plastic dryer has a heating temperature adjustment function and a heating time adjustment device. With overheating protection function, when the heating temperature of the heating tube exceeds the set temperature, the machine will stop heating immediately to protect the machine and raw materials.
